Bộ đổi nguồn AC/DC Din-Rail MCTT-NDR-75-48 76.8W, 48VDC, 1.6A

Chia sẻ

Thương hiệu: MCTT Loại: NDR-75

Tình trạng: Còn hàng

Mã sản phẩm: MCTT-NDR-75-48

CAM KẾT CỦA CHÚNG TÔI

Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7

Để được hỗ trợ. Hãy gọi: 0904251826

Khuyến mãi đặc biệt !!!

Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đ

FREESHIP Miễn phí vận chuyển

HSD: Không thời hạn

Sao chép

Mô tả sản phẩm

Bộ đổi nguồn AC/DC Din-Rail MCTT-NDR-75-48 76.8W, 48VDC, 1.6A

75W Single Output Industrial DIN Rail Power Supply NDR-75 series

Features:

Universal AC input / Full range

Protections: Short circuit / Overload / Over voltage/ Over temperature

Cooling by free air convection

Can be installed on DlN rail TS-35/7.5 or 15

UL 508 (industrial control equipment} approved

EN61000-6-2(EN50082-2} industrial immunity level

100% full load burn-in test

1 years warranty

Model	NDR-75-12	NDR-75-24	NDR-75-48
Dc Voltage	12V	24V	48V
Rated Current	6.3A	3.2A	1.6A
Current Range	0 ~ 6.3A	0 ~ 3.2A	0 ~ 1.6A
Rated Power	75.6W	76.8W	76.8W
Ripple & Noise (Max.)	80mVp-p	120mVp-p	150mVp-p
Voltage Adj. Range	12 ~ 14V	24 ~ 28V	48 ~ 55V
Voltage Tolerance	±2.0%	±1.0%	±1.0%
Line Regulation	±0.5%	±0.5%	±0.5%
Load Regulation	±1.0%	±1.0%	±1.0%
Setup, Rise Time	1200ms, 60ms/230VAC 2000ms, 60ms/115VAC at full load
Hold Up Time	60ms/230VAC 12ms/115VAC at full load
Voltage Range	90 ~ 264VAC 127 ~ 370VDC [DC input operation possible by connecting AC/L(+), AC/N(-)]
Frequency Range	47 ~ 63Hz
Efficiency	85.50%	88%	89%
Ac Current	1.45A/115VAC 0.9A/230VAC
Inrush Current	20A/115VAC 35A/230VAC
Leakage Current	<1mA / 240VAC
Overload	105 ~ 130% rated output power
	Protection type : Constant current limiting, recovers automatically after fault condition is removed
Over voltage	14 ~ 17V	29 ~ 33V	56 ~ 65V
	Protection type : Shut down o/p voltage, re-power on to recover
Over Temperature	Protection type : Shut down o/p voltage, re-power on to recover
Working Temp.	-20 ~ +70℃ (Refer to "Derating Curve")
Working Humidity	20 ~ 95% RH non-condensing
Storage Temp., Humidity	-40 ~ +85℃, 10 ~ 95% RH
Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
Vibration	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
Withstand Voltage	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
Emc Emission	Compliance to EN55032 (CISPR32), EN61204-3 Class B, EN61000-3-2,-3, EAC TP TC 020
Emc Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A, EAC TP TC 020
Mtbf	486.2K hrs min. MIL-HDBK-217F (25℃)
Dimension	32102125.2mm( LWH)
Packing	0.51Kg; 28pcs/15.3Kg/1.22CUFT
Note
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.