Chào mừng bạn đến với MC&TT!
Switch công nghiệp
Máy tính công nghiệp
Bộ chuyển đổi tín hiệu

I-8091 CR: Module điều khiển động cơ bước/Servo 2 trục (Stepping/Servo Motor)

Chia sẻ
Thương hiệu: ICP DAS Loại: I-8K/I-87K Motion Control
Tình trạng: Còn hàng
Mã sản phẩm: I-8091 CR

I-8091 CR 2-axis Stepping/Servo Motor Control Module (Blue Cover) (RoHS) (Only suitable for I-8000 and ISaGRAF PAC)

Liên hệ
CAM KẾT CỦA CHÚNG TÔI
  • cam kết Cam kết 100% chính hãng
  • cam kết Hoàn tiền 111% nếu hàng giả
  • cam kết Giao hàng nhanh chóng & an toàn
  • cam kết Hàng hóa đầy đủ CO, CQ
  • cam kết Hỗ trợ 24/7
Liên hệ
Để được hỗ trợ. Hãy gọi: 0904251826
vouverKhuyến mãi đặc biệt !!!
  • Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
  • Miễn phí vận chuyển với đơn hàng từ 10.000.000đMiễn phí vận chuyển với đơn hàng từ 10.000.000đ
FREESHIP
FREESHIP Miễn phí vận chuyển
HSD: Không thời hạn
Sao chép

I-8091 CR: Module điều khiển động cơ bước/Servo 2 trục (Stepping/Servo Motor)

Features

• 2-axis Independent, Simultaneous Stepping Motor Control/ Servo Motor Control (Pulse Input Type)
• Maximum Pulse Rate: 1 Mpps
• Maximum Step Counts: 232 - 1 Steps
• Command Type Interface
• 2-axis Linear, 2-axis Circular Interpolation
• Automatic Trapezoidal Acceleration/Deceleratio
• Output Pulse modes: CW/CCW or Pulse/Direction
• Output Polarity can be Programmable
• 3 Optical Isolated Dgital Inputs per Axis for Limit Switches
• Programmable Limit Switch Initial Condition as Normal Open (N.O.) or Normal Close (N.C.)

Introduction

I-8091 stepping motor control card is a micro-computer controlled, 2-axis pulse generation card. It includes a 2K bytes FIFO to receive motion command from host. A micro-computer for profile generation and protection, 2-axis DDA chip to execute DDA function when interpolation command is used, 2500 VDC optical isolation inserted for industrial application.

Specification

Isolation
Intra-module Isolation 2500 VDC

 

EMS Protection
ESD (IEC 61000-4-2) ± 4 kV Contact for Each Terminal

 

LED Indicators
Status 1 x Power and Communication
7 x I/O

 

Encoder Input
Type 1. CW/CCW
2. Pulse/Direction

 

Motor Output
No. of Axes 2-axis
Step Frequency 1 Mpps

 

Power
Consumption 3.9 W Max.

 

Mechanical
Dimensions (mm) 31 x 114 x 66 (W x L x H)

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-8091     CR  2-axis Stepping/Servo Motor Control Module (Blue Cover) (RoHS)
(Only suitable for I-8000 and ISaGRAF PAC)
Danh sách so sánh